H743v1 Flight Controller

The CORVON H743v1 is a proven 30×30 flight controller — STM32H743 at 480 MHz with dual IMUs, a workhorse for FPV builds and UAV platforms on any of the four major firmware stacks.

- Dual IMUs: Bosch BMI088 + BMI270
- DPS310 barometer + IST8310 compass
- 7 UART ports, 10 PWM outputs (DShot capable)
- On-board BEC rails: 5V 3A + 9.5V 3A
- USB-C, blackbox logging

Key specs:
MCU: STM32H743VIT6, Cortex-M7 @ 480 MHz (2 MB flash / 1 MB RAM)
IMU: BMI088 + BMI270 (dual)
Barometer: DPS310 · Compass: IST8310
UART: 7 · PWM: 10 (DShot)
BEC: 5V 3A · 9.5V 3A
Power: 2S–6S LiPo
Size & weight: 36 × 36 × 8 mm · 30.5 × 30.5 mm mounting · 9 g
Firmware: PX4 · ArduPilot · INAV · Betaflight

In the box:
1× H743v1 flight controller
2× SH1.0-8P cable (48 mm)
1× SH1.0-6P cable (160 mm)
4× SH1.0-4P cable (155 mm)
1× SH1.0-3P cable (85 mm)
1× SH1.0-3P cable (105 mm)
5× M3 hex socket screw
5× M3 hex nut
5× M3 rubber standoff (blue)
5× rubber O-ring pad (black)

Full pinout, wiring, and electrical data: see the spec sheet on this page.