H743v2 Flight Controller with 50A 8 bit Stack

H743v2 Flight Controller with 50A 8 bit Stack

$88.99
Skip to product information
H743v2 Flight Controller with 50A 8 bit Stack

H743v2 Flight Controller with 50A 8 bit Stack

$88.99

A pre-matched 30×30 stack: the CORVON 743v2 flight controller paired with a 50A 8-bit 4-in-1 ESC — wired, mounted, and verified together for FPV pilots, aerial mapping, and DIY builds.

- FC: STM32H743 @ 480 MHz, dual IMUs (ICM-42688-P + BMI088), BMP581 barometer + IST8310 compass
- 8 UART ports (incl. DJI O4 + Bluetooth), 12 PWM outputs
- ESC: 50 A × 4 continuous, 60 A × 4 burst (30 s), 8-bit MCU
- PWM / DShot / OneShot motor protocols
- 2S–6S LiPo for the stack (the FC alone takes 2S–10S)

Key specs:
FC MCU: STM32H743VIH6, Cortex-M7 @ 480 MHz (2 MB flash / 1 MB RAM)
Sensors: ICM-42688-P + BMI088 · BMP581 · IST8310
UART: 8 · PWM: 12 (M1–M10 DShot, M11/M12 servo)
BEC: 5V 3A · 9V 2A
ESC: 50 A × 4 continuous · 60 A × 4 burst (30 s) · 8-bit
Protocols: PWM / DShot / OneShot
Power: 2S–6S LiPo (ESC 6–28 V) · 30.5 × 30.5 mm M4 mounting
Firmware: PX4 · ArduPilot · INAV · Betaflight

In the box:
1× 743v2 flight controller
1× 50A 4-in-1 ESC (8-bit)
1× XT60 pigtail (12 AWG, 155 mm)
1× 35 V 1000 µF solid capacitor
2× SH1.0-8P cable (48 mm)
1× SH1.0-6P cable (160 mm)
4× SH1.0-4P cable (155 mm)
1× SH1.0-3P cable (85 mm)
1× SH1.0-3P cable (105 mm)
5× M3 hex socket screw
5× M3 hex nut
10× M3 rubber standoff (blue)
5× rubber O-ring pad (black)

Full pinout, wiring, and electrical data: see the flight-controller and ESC spec sheets in our Docs.

You may also like